Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
- 3.3. Removal and partition of engines
   + 3.3.2. Technical characteristics
   3.3.3. Repair work, possible without engine dismantle
   + 3.3.4. Major maintenance
   3.3.5. Removal and engine installation
   3.3.6. Engine partition
   + 3.3.7. Head of cylinders
   3.3.8. Pistons and rods
   + 3.3.9. Cranked shaft
   3.3.10. Intermediate shaft
   3.3.11. Block of cylinders
   3.3.12. Radical bearings and bearings of rods
   3.3.13. Piston rings
   3.3.14. The first start of the engine after a partition
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c
Интересное для женщин: https://glamorlady.ru

3.3.10. Intermediate shaft

Removal

PERFORMANCE ORDER
1. Remove a gas-distributing belt and an asterisk of an intermediate shaft.

2. Measure a free wheeling of a shaft. If necessary replace a shaft.
3. Remove a flange of a shaft and get an epiploon and a sealing ring. For this purpose олабьте bolts.
4. Remove a flange of an intermediate shaft.
5. Take an epiploon.
6. Get a sealing ring.
7. Get a shaft and examine it on existence of wear and damages. If necessary replace a shaft.

Installation

Installation is made in sequence, return to removal.